Bentel Omnia 4 Uživatelský manuál stáhnout pdf (Strana 5)

BENTEL

USER MANUAL

[USER CODE 1] + [ON]

(Leave via ENTRY/EXIT Zone)

1. Ensure that all zone indicators are distinguished; if not, check that all protected premises

are closed.

2. Enter a valid 4-6 digit [USER CODE 1]. If you enter any mistakes, press [ESC] key and re-

enter the code followed by [ON] key to confirm you command.

3. The ARMED indicator will illuminate and the keypad audible indicator will sound on and off

for the duration of the EXIT delay.

4. Leave the premises only via the EXIT/ENTRY zone.

5. User will be given an ENTRY delay time to disarm the system when enter the protected

premises via ENTRY/EXIT zone.

[USER CODE 1] + [A]

6. It is also possible to AWAY arm by [ USER CODE 1 ] + [A]

[USER CODE 1] + [B]

1. This arming mode is ideal for NIGHT time arming with user still remains in the protected

premises.

2. Ensure that all zone indicators are distinguished; if not, check that all protected premises

are closed.

3. DO NOT open the ENTRY/EXIT zone.

4. Enter the [USER CODE 1] and following [B]

5. The ARMED indicator will illuminate.

6. There is no ENTRY delay in this arming mode. Any violation on the active zones will trigger

the system instantly.

1. This arming mode is ideal for remote control unit.

2. The system will arm in AWAY arming mode.

3. The system will be armed with EXIT delay time which allows certain violated zones to be

bypassed temporary. When the violated zones resume, the zone will be protected again.

4. Press the remote control button.

5. The system will be armed instantly. Leave the premises via ENTRY/EXIT zone.

6. The ARMED indicator will illuminate the keypad audible indicator will sound on and off for

the duration of the EXIT delay.

7. If programmed to do so, the siren will sound briefly for this remote control arming.

8. User will be given an ENTRY delay time to DISARM the system when enter the protected

premises via ENTRY/EXIT zone.

AWAY ARMING

REMOTE CONTROL ARMING

INSTANT

ARMING

1 2 3 4 5 6 7 8 9 10

Žádné komentáře

Bentel Omnia 4 Uživatelský manuál Strana 5